Welcome to Daylight Savings Time. How To Update System Time:

Inter-Tel Axxent - From the attendant telephone

·       While the phone is idle, enter "9800". Display shows "DATE:"

·       Enter Date MM:DD:YY. Press "#" to skip date entry.

·       The display will show "TIME". Enter the time in 12-hour format.

·       The display will then show: "Press 1 for AM, press 2 for PM". Select one.

·       Press "#" to exit.

Inter-Tel Axxess - Networked Systems Only - From the attendant telephone

·       While on hook, enter the Set Network Date and Time feature code (9810). Your displays the current date.

·       If you do not need to change the date, press "#" or ACCEPT to skip to the time prompt.

·       Use the dialpads to enter month day and year mm-dd-yy format.

·       If you make a mistake, press "MUTE" to backspace or "*" to start over.

·       Use the dialpad buttons to enter the time in hours and minutes "0900" for 9:00.

·       If 12-hour display is used, the display shows AM or PM. Press "1" for AM and "2" for PM.

Inter-Tel Axxess - Non-Networked Systems - From the attendant telephone

·       While on-hook, enter "9800" for Set Date/Time feature. The current date will display.

·       Press "#" to skip. To change, use keypad to enter the month, day and year (010305=January 3, 2005). The new date will display.

·       Use keypad keys to enter the time in hours and minutes (0900=9:00).

·       If the system is set for 12-hour format, the display will show SELECT AM OR PM (AM=1 PM=2). Select 1 or 2.

·       The display reads, "SYSTEM DATE AND TIME UPDATED".